Корзина покупателя

TRONXY Glow in The Dark PLA,Glow in The Dark Filament Multicolor, Green, Blue and Orange, 3D Filament Bundle,1.75 PLA Filament, Dimensional Accuracy +/- 0.02 mm,for Most 3D Printers 250g*4 Pack

$42.99

Brand: TRONXY

Color: Multicolour Glow

Features:

  • 【Glow in the Dark】Tronxy 3d printer filament glow in the dark contains glowpowders that glow in the dark after absorbing light energy. The light energy is absorbed for 15 minutes and then the filament produces a magic glowing effect. To protect the filament from the effects of use, we recommend that it is exposed to light sources for no more than 2 hours.
  • 【Excellent Quality】4 x 250G 3d filament bundle with diameter of 1.75 mm. Multicolor bundle by Gradient, Green, Blue and Orange. PLA filament 1.75mm bundle has high precision, no bubbles, no clogging, no smell, It has high toughness and high compatibility, compatible with most FDM 3D printers.
  • 【Recommended Printing Settings】Gow in the dark pla filament 1.75 printing temperature: 190 ~ 220 ° C, the PLA glow in the dark printing speed of merged: 45-50mm/s, 3D printer hot bed: 60 ~ 65 ° C. Nozzle: ≥ 0.4mm.
  • 【Applications】 3d printing filament light wires can be made in printed materials that are glowing at night, which is very suitable for party, Thanksgiving and Christmas printing decorations.
  • 【Special instructions on PLA luminous brightness!!!】 Due to process reasons, if too much phosphor is placed, it will affect the toughness and smoothness of the product itself. At present, the brightness and toughness of this luminous PLA are relatively appropriate after comprehensive blending. In order to ensure the process and advantages of PLA, the brightness and durability of this luminous PLA will not be too high. If customers are looking for very durable or very bright glow, we recommend that you do not buy this filament.
  • 【Tips for Glow in the Dark Filament 1.75mm 】Our 3d printer filament bundle were dry vacuum before leaving the factory, and there were desiccants, so we could to a large extent to avoid moisture. Please use it with confidence. However, due to the different climate of each place and the degree of humidity in the air, if the filaments you get have a sticky feel or printed stringing, it is recommended to dry it with a filaments dryer for 2 hours (50 degrees drying temperature) Then print it again to avoid stringing and help to print smoothly.
  • 【After -sales】 If you have any product quality problems, please contact us at any time, except for holidays,we will solve your problem within 24 hours.

Binding: Office Product

model number:  Multicolour Glow Green Blue and Orange 250g*4

                            Multicolour Glow Green Blue and Orange 1KG/ROLL

Part Number: PLA-250X4-GBO

                         PLA-3C-OBG

Package Dimensions: 6.9 x 6.6 x 6.4 inches